Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

AheadSet Universal Preload Bolt
$0.90
- Aheadset preload adjusting bolt
No Image
$5.00
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm
No Image
$10.00
- Chromoly steel - CNC fabrication - 1.29" x 24tpi left hand thread
All-City Top Cap
$10.00
Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap. - Includes star nut
No Image
$15.00
Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps
No Image
$15.00
Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...
No Image
$20.00
All-City Singlespeed Disc Brake AdaptorĀ 
No Image
$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware
No Image
$50.00
The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models. - Allows riders to convert from a geared to single-speed setup or vice-versa - Compatible only with select All-City models - No additional chain tension adjustment required - Threaded cap / nut for axle installation - Cap nut and O-ring included - Use with drive-side plates
No Image
$4.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
Avid IS Disc Brake Adaptor
$23.00
- Includes stainless bolts - Fits 160mm front and 140mm rear rotors
No Image
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
No Image
$27.00
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
No Image
$64.00
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2011-2016 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
Black Ops Seat Clamp
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts - Clamp Size: 25.4mm - Material: Alloy
Campagnolo H11 Disc Caliper Mounting Screws
$9.95 - $10.95
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
No Image
$11.95
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Fits external seat post diameters from 30.9 - 31.6mm - Not compatible with the V2 Power Unit
No Image
$16.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Not compatible with the V3 Power Unit - Required for external mounting of V2 Power Unit
No Image
$22.45
Campagnolo EKAR disc brake adapters. - Includes bolts
No Image
$23.95
Campagnolo EKAR disc brake adapters. - Includes bolts
No Image
$28.45
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - For mounting the V3 power inside the seat tube using the water bottle screws - Not compatible with the V2 Power Unit
No Image
$39.90 - $55.66
- Fits 2000 and newer Campagnolo wheels - Fits all Fulcrum wheels - Fits 1999 Record/Chorus hubs and all Campy hubs 2000-newer - 27.0mm thread OD 10-speed: - For use with Campagnolo cassettes with 12 to 16 tooth first position cogs - Lockring has a 38.5mm flange diameter 11-speed: - For use only with Campagnolo 11 speed cassettes with 12 tooth first position cogs
No Image
$82.45
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
No Image
$125.00
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Weathertight, o-ring sealed connectors - Waterproof to 1m for 30 minutes (IP67 Rated) - Compatible only with the Chorus Power Unit
No Image
$138.95
- EPS under-seat shifter cable kit
No Image
$200.00
Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.
No Image
$0.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction
No Image
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
No Image
$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
No Image
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts.
Cane Creek 40-Series 41mm Compression Ring
$5.00
Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings
Cane Creek Norglide Bushing for 14.7mm Bores
$6.00
Replacement bushings for Cane Creek shocks.
No Image
$7.50
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
No Image
$7.50
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
No Image
$7.50
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
No Image
$7.75
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
No Image
$8.00
Replacement seals for servicing Cane Creek rear shocks.
No Image
$9.00
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
No Image
$9.00
Air Spring Volume Reduction Kit - 1 x 5000 cubic mm spacer - 2 x inner air can o-rings
No Image
$9.00
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
No Image
$9.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 38mm lower headset bearings - Compatible with 26.4mm (1") straight steerer tubes - Durable steel construction
No Image
$9.99
Travel reduction clips for Cane Creek suspension forks.
Cane Creek 40-Series Zinc-Coated Steel Cartridge Bearing - 36 x 45 Degree
$10.50 - $18.00
40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets
No Image
$11.00 - $21.99
40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek Interlok Spacer
$11.00
- Color-matched aluminum Interlok Spacer for Cane Creek headsets
No Image
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction
No Image
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements
No Image
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 47mm lower headset bearings - Compatible with 33mm (1-1/4") tapered steerer tubes - Lightweight aluminum construction
No Image
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction - Allows the installation of a straight steerer fork without changing out the headset lower
No Image
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements
No Image
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction
No Image
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower
Cane Creek 40-Series 52/40mm Steel Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction
No Image
$13.00 - $15.00
AER spacers feature strategic weight saving cutouts for the lightest build possible.
Cane Creek eeSilk+ Elastomer
$13.99
Elastomers are designed for use with eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Extra Soft: 40 Durometer - Soft: 50 Durometer - Medium: 60 Durometer - Firm: 70 Durometer - Extra Firm: 80 Durometer
Cane Creek 40-Series Short Top Cover
$14.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included
No Image
$16.99
Replacement inserts for Thudbuster G4 suspension seatposts.
No Image
$18.99
Cane Creek's Thud Glove protects the moving parts of your Thud Buster seatpost from dirt and weather. Available in both short- and long-travel models. - Neoprene construction
No Image
$21.00
Replacement seals for servicing Cane Creek rear shocks.
Page 1 of 17 Next page