Lighting

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Quick mount headlight bracket - Fits 25.4 – 31.8mm handlebars

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

3 LED tail light The Blinky 3 is a classic cycling safety light. The iconic and durable kidney bean design has been keeping bikers visible for two decades. The 3 LEDs are super efficient and last for over 100 hours on flash mode.

Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.

- Versatile LED and accessories forward mount - Bolts directly to stem faceplate - Included Aluminum Fork Mount, spacer and screw set - Suitable for most Lezyne most E-Bike front lights (Macro, Power, Power Pro, Micro, Hecto)

Cat Eye Mounts & Brackets can be added to multiple bikes, allowing any bike to be quickly adapted for nighttime rides. - Center-mount bracket uses the fender mount location at the fork crown - Keeps handlebars clear of clutter and lowers light to provide better contrast for the road surface - Compatible with AMPP1100 / 800, VOLT1700 / 1600 / 1200 / 800 / 700 / 400 / 300 / 200 / 100, Nano Shot+, Nano Shot, Econom Force, Econom, Uno, Jido, and HL-EL135

- Installs under the seat for a low profile, less cluttered appearance - Easy to install and stays secure in all terrain - Clamps to most two-rail bicycle saddles - Use with Cygolite Hypershot and Hotshot tail lights - Can also be used with GoPro compatible interface - Premium plastic for strong durability - Only weighs 23 grams - Less prone to scratching bikes compared to metal mounts - Tail light secures to mount without removing from saddle rails - Designed, engineered, and assembled in the USA

The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

Helmet mount kit compatible with Ranger, Expilion, Metro Pro and Plus, Metro, Streak, and Pace systems. - Includes: helmet bracket, velcro strap, and foam pad.

Super bright and compact, Cateye's Omni 3 Front Safety Light uses CatEye's Omni Directional Technology for increased visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and extend the run time. Plus, CatEye's tool-free FlexTight mount makes installation easy.

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

Multi-use LED safety band By day, it’s a mild-mannered pant strap but when the sun goes down it transforms into the BRT Strap! The BRT stands for BRIGHT and our little LED safety band can be used as a pant strap, arm band or dog collar. Strap it to anything and you’ll be sure to get noticed whether you’re on your bike, out for a jog or taking Rover for an evening stroll.

Cute combo set that lights you up The Blinky Safety Set is a brilliant combo set in a super compact package. They clip on to your bike bag or mount to your bike. Where ever you attach them, they get you noticed when you are out and about when the sun goes down.

Safety bike lights that are cute as a button The Button Blinky Safety Set provides a quick way to keep you visible on your next bike ride. Two high-output LEDs give you steady and flashing modes with 160° of visibility. These little lights are brilliant, easy to mount, and cute as a button! Button Blinky front specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 12 hrs (steady – 15 lm) and up to 40 hrs (flashing - 15 lm) - Provides 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams Button Blinky rear specs: - 2 high output surface mounted LEDs provide steady and flashing modes - FL1 Tested - Run times: 20 hrs (steady – 4 lm) and up to 50 hrs (flashing - 4 lm) - Provide 160° of visibility - One CR2032 battery (included) - Mounts with rubber stretch strap - 18 grams

Amber side safety lights that are cute as a button The Button Blinky Amber safety side lights are the perfect way to complete 360 degrees of visibility on your bike. The strong rubber straps are designed to mount to multiple points on your bike, including your fork, stem, top tube, down tube, seat post and rear stays. The little lights has two modes and offer run times of up to 85 hours on replaceable CR2032 batteries. These little lights are brilliant, easy to mount and cute as a button!

The perennially popular Spok is a commuter classic. It’s the bicycle safety light that’s sleek, compact and super functional. It straps to everything including bars, helmets and hubs. It’s a great light to have for those unexpected night rides because it keeps you illuminated no matter where you mount it.

Fast-mounting safety light The perennially popular Spok is a commuter classic. It’s the little bicycle safety light that has a fun design that’s super functional. It straps to everything including helmets, hubs, saddle rails, and seat posts. It keeps you illuminated no matter where you strap it on.