Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
ABI Headset Bearing for new builds or replacements.
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables.
- Fits all Greenfield kickstands and most generics
- Made in the USA
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes.
- Includes hardware to mount adaptor to frame
NEW: Please refer to our chart for the correct adapter size you need.
Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors
CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup.
The Post Mount standard is universal for front and rear brakes.
Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter.
To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.
If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment.
Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available.
Not currently compatible with TRP 203mm rotors.
• Fits 3/8" Axles
• Lightweight, compact design
• Forged aluminum construction
• Chromoly bolt
The Problem Solvers Handlebar Clamp Shim adds thickness to a smaller diameter handlebar so it can be used with a larger diameter clamping stem.
Rival eTap AXS Rear Derailleur Pulley Kit
- Steel bearings
- Includes 12T upper and 12T lower pulleys
- 18.5mm and 12.9mm steel pulley screws
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Brake lever blades are easy to bend or break, but their sacrifice saves the more expensive parts of your brake system, which is a good thing! Shimano Hydraulic Disc Brake Lever Blades can be used on either the left or right lever, and these are for XTR 9020 brakes.
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.
Loose ball bearings in bags or bottles.
- Replacement loose ball bearings
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.90
Replacement small parts for Hope disc brake Hope disc brake calipers.
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Page 1 of 55
Next page