Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Park Tool Super Patch Kit (Carded)
$3.49
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Topeak SmartGauge D2
$39.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Genuine Innovations Tubeless Tire Repair Kit
$7.99
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
Topeak Presta Valve Extender XL
$9.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Lezyne Micro Floor Drive Hose w/Digital Gauge
$54.99
This is a replacement hose for your Lezyne Micro Floor Digital Drive pump. It offers an integrated, highly advanced, inline digital gauge and ABS Flip-Thread chuck.
Topeak Pressure-Rite Schrader Valve Adapter
$19.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
Topeak SmartHead Upgrade Kit
$29.95
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.
Crank Brothers Klic CO2 Inflator Head
$9.99
Klic Co2 head/cartridge adaptor replacement
Lezyne Composite Matrix Pump Mount HP
$5.99
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
XLAB Sonic Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
Serfas Inflator Levers
$20.00
The best of both worlds are now combined into one. Three tire levers and a CO2 inflator head round out this combo tool. Features: - 1 Tire Lever With Built In CO2 Inflater - 2 Tire Levers With Built In Spoke Hooks - Presta & Scharder Valve Compatible Specs: - Number of Tools: 2 - Weight: 38 Grams - CO2 Lever Length: 5 1/4? - Lever Length: 4 1/2?
Serfas Tubeless System Combo Kit-Presta
$70.00
Serfas' Tubeless System Combo Kit offers the ultimate kit to go tubeless! Tire Medic Sealant and tubeless rim tape let you seal up your regular clincher rims so you can enjoy superior ride quality. Included in the kit is two Presta valves with removable cores, extra valve core, presta to schrader adapter and two fill fill tubes. There has never been a better time to go tubeless! • compatible with presta valves • includes: two 125ml sealant bottles, rim tape for two wheels with inner width of 15-17mm, presta to schrader adapter, two fill tubes, two presta valves with removable cores, presta key & extra valve core •sealant is co2 compatible • sealant will not freeze
Prestacycle Angle Mini Presta Head
$12.95
Prestacycle's new Mini Angle Presta Head has more room to fit into more wheels. It includes their newest version of the Mini Presta Head Gasket using Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
SKS Pump Adapter with Chain
$7.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
Topeak Floor Pump Parts Kit
$4.95
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Topeak TubiBooster X
$79.95
An aluminum air chamber with inflator head that stores an air charge of one liter, up to 200psi / 14 bar. Works with a floor pump to quickly fill your tires and ensures proper installation on a tubeless rim at home. Once you flip the selector from "CHARGE" to "INFLATE" mode, air bypasses the chamber as you use the floor pump to inflate your tire to the perfect pressure. An integrated flexible hose with pump head works with Presta and Schrader valves and takes stress off the valve stem while pumping. - Pump Head Compatibility: Presta pumps - Tire Valve Compatibility: Presta / Schrader valves - Air Chamber: One liter, Store up to 200psi / 14 bar air pressure (Varies with the pump capacity) Working Pressure - 1800psi / 124 bar - Material: Aluminum / Rubber / Engineering grade polymer - Flexible hose - Weight: 985g / 2.17oz (Total) 820 g / 1.81lb (Air chamber) - Hose Length: 26 Size - 36 x 11.4 x 8.6cm / 14.2" x 4.5" x 3.4" (Total) - 28.5 x 8.1cm / 11.2" x 3.2" (Air chamber)
Park Tool Pump Rebuild Kit (for PFP-3, PFP-6, and PFP-8)
$5.90
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Problem Solvers Air-Bob Replacement Inflation Lever
$9.99
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original lever, no problem, here's the replacement part to get you back up and running.
MSW Airlift Floor Pump Replacement Hose Kit
$10.99
Replacement hose kit for MSW AirLift floor pumps. - Smart head fits on both Presta and Schrader valves - Extra-long 48-inch hose - Barb-type hose connection
XLAB Starter Kit
$93.95
• Complete packaged system containing all essential items for training and Sprint race distances • Includes the key items for training • Includes essentials you need for short triathlons • Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: • TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. • STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes • NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation • AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
Topeak Twinhead Upgrade Kit
$29.95
Upgrade any pump to the TwinHead pump head.
SKS EVA Pump Head Grommets
$4.25
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
SKS Digital Airchecker
$36.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
Fabric Accubar Pressure Gauge
$49.99
Hit the trails with confidence and gain psi-perfect control of your ride with the Accubar tire pressure gauge. Get pinpoint tire pressure accuracy, delivering off-road excellence, in any condition. Specifically designed for mountain bike tires when accuracy under 40psi is essential. It even attaches to any pump for faster, easier, more accurate tire pressure, when it matters most. - Highly accurate - Low pressure gauge - Works as standalone gauge - Use in-line with pump - Fits Presta or Schrader valve
Prestacycle Prestaflator Mini Bicycle Tire Inflator
$36.95
Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.
Specialized SWAT Mini CO2 Head
$12.00
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Prestacycle Coil Hose
$29.95 - $39.95
Coil hose made is USA is superior to imported coil hoses. Rated for high pressure and durability. Brass swivel ends on both ends of the hose. Standard 1/4” NPT threads. Narrow hose increases strength and reduces waste when using Nitrogen. Short length hose recommended when your inflation source is close to your work or is portable and is usually moved to your work. Great for Nitrogen and small portable Air Compressors. Vibraseal coated threads, no thread tape or sealant needed!
Serfas Pump O-Ring
$3.00
Replacement O-ring for Serfas floor pumps
Topeak SmartHead ThreadLock Upgrade Kit
$17.95
Topeak's incredibly compact CNC aluminum Threadlock Upgrade Kit threads directly to Presta or Schrader Valves with no need to change internal parts or use extra adapters. It fits most rubber pump hoses, and is compatible with Topeak JoeBlow Ace, JoeBlow Mountian, JoeBlow Sport II, JoeBlow Max II and JoeBlow Max HP.
Prestacycle Pump Upgrade/Repair Hose
$24.95
- Allows you to upgrade floor pumps to accept Prestacycle attachments - Spin-On presta head with pressure release option, USA-made 36" hose and hose clamp are included
Page 1 of 3 Next page