Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Wheels Manufacturing Inc. Derailleur Hanger 8
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt Note: Same hanger as Wheels Mfg DROPOUT-6.
Wheels Manufacturing Inc. Derailleur Hanger 87
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 9
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 94
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (bolt only)
Wheels Manufacturing Inc. Flat Head Screw
$2.65 - $3.50
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5
Wheels Manufacturing Inc. Grade 25 Loose Ball Bearings
$13.50
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25 bearings are Dura-Ace or Campagnolo Record quality.
Wheels Manufacturing Inc. Grade 300 Loose Ball Bearings
$17.95
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.
Wheels Manufacturing Inc. Shimano/SRAM Single Speed Conversion Kit
$33.00
This Wheels Manufacturing Shimano/SRAM Single Speed Conversion Kit includes chain guides for carefree single speeding. Large chain guides sandwich the cog with diameters slightly larger than the cog to keep the chain from hopping off the rear cog. Includes: - (2) - 9mm chain guides - (6) - 3mm spacers - (2) - 1mm shims - (4) - 0.3mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any ½ x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain Note: Does not work acceptably with any 10 or 11-speed chain
Sunlite Alloy Seat Clamp
• Aluminum clamp with a chromoly bolt
Sunlite Seat Binder Bolt
- Chrome allen seat binder bolt
Sunlite Seat Binder Bolt Cromo
$5.00
- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm
Sunlite Specialty BB Axle Bolt
$5.00
- Large Flange-Fits Splined MX Cranks - Sold in pairs
Sunlite Stainless Steel Button Head Bolts
- Stainless steel button head bolts - Sold in bags of 10
Sunlite Yoke Hanger
- Standard steel replacement
Specialized Rear Rack Seat Collar
$15.00
Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminum for durability, with threaded inserts to bolt the stays directly into the seat clamp. - 35mm inner diameter fits all alloy Specialized MTB frame designs with 30.9mm posts and 35mm O.D. seat tubes. - 37mm inner diameter fits all carbon Specialized MTB frame designs with 30.9mm posts and 37mm O.D. seat tubes.
Shimano 10-Speed Chain Pins
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
Shimano 11-Speed Chain Pins
$15.99
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
Shimano Di2 E-Tube Wire
$26.99 - $36.00
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
Shimano In-Line Brake Cable Adjuster
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
Shimano XTR M9020 Replacement Brake Lever Unit
Brake lever blades are easy to bend or break, but their sacrifice saves the more expensive parts of your brake system, which is a good thing! Shimano Hydraulic Disc Brake Lever Blades can be used on either the left or right lever, and these are for XTR 9020 brakes.
Salsa Alternator 1.0 Right Plate
$30.00
Replacement swing plates for Alternator 1.0 dropouts.
Salsa Derailleur Hanger
$20.00
Replacement derailleur hangers for Salsa frames. Mounting screws included. Hanger 257 Fits: Salsa Ala Carte Ti 2011, Salsa El Mariachi Ti 2010-2012, Salsa Fargo 2011-2013, Salsa Fargo Ti 2011-2013, Salsa Spearfish 2011-2013 with QR Rear Triangles, Salsa Vaya 2011+, Salsa Vaya Ti 2011-2012, Salsa La Cruz Ti 2011, Salsa Beargrease 2013, Salsa Warbird 2013-2015, Salsa Warbird Ti 2013-2015, Salsa Colossal 2013+, Salsa Colossal Ti 2013-2014, Salsa Mamasita 2012-2013, Foundry Chilkoot 2016 Hanger for 2014+ Split Pivot Frames Fits: all Split Pivot Horsethief, Pony Rustler, Spearfish Bucksaw and Deadwood Suspension Hanger for 2015 Beargrease 2 and Cogburn CB4 Fits: Cogburn CB4 and Salsa Beargrease 2 2015
SRAM Bottom Bracket Adaptor
$38.00
SRAM PressFit 30/English Bottom Bracket Adaptor allows conventional threaded bottom brackets to be installed in a PF30 frame. - Not to be used with internal threaded bottom brackets; compatible with BBs that use two external cups
SRAM NX/SX Eagle Rear Derailleur Pulley Kit
$20.00
Original equipment rear derailleur pulleys for SRAM rear derailleurs. - NX/SX Eagle Rear Derailleur Pulley Kit
SRAM Power Link Chain Connector
$17.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
SRAM PowerLock Chain Connector
$4.25 - $17.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
SRAM PowerLock Chain Connector 12-speed
$17.00
- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4
RockShox Maxle Lite Through-Axle
$47.00 - $56.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
RockShox Maxle Stealth Front Thru-Axle
$26.00 - $42.00
The Maxle Stealth offers a light, low profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
RockShox Maxle Stealth Rear Thru-Axle
$31.00
Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
RockShox Maxle Ultimate Front Thru-Axle
$65.00
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
Ritchey Brake Cable Quick Disconnect
$15.00
- Break-Away Quick Disconnect - Time-saving system for managing brake cables on Break-Away bikes - Light threaded alloy barrels with rubber noise dampener - Available for both derailleur and brake cables - Brake Quick Disconnect sold individually
Ritchey Break-Away Derailleur Cable Disconnectors
$15.00
- Break-Away Quick Disconnect - Two pieces: front derailleur / rear derailleur - Time-saving system for managing derailleur cables on Break-Away bikes - Light, threaded, alloy barrels with rubber noise dampener
Redshift Sports Replacement Elastomer Kit For Shockstop Stem
$9.99
Make your ShockStop Suspension Stem feel like new again with the Replacement Elastomer Kit. Mix and match different stiffnesses to perfectly tune your ShockStop Stem. What's in the Box: - One of each 50, 60, 70, 80, and 90 durometer elastomer (softest to hardest)
Problem Solvers 1-1/8-inch Headset Spacers
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm
Problem Solvers Backstop
$23.75
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.
Problem Solvers Brake Boss Plugs
$5.15
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
Problem Solvers Braze-On Front Derailleur Adapter
$17.99 - $20.85
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
Problem Solvers Braze-on Light Mount
$19.99
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
Problem Solvers Cassette Spacer
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
Problem Solvers Handlebar Clamp Shim
$7.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
Problem Solvers MisMatch Adapter 1.2
$25.00
MisMatch 1.2 adaptors allow users to mount a SRAM MatchMaker shifter to a Shimano I-Spec-II brake lever clamp. - Installation hardware included - Anodized black - Sold each
Problem Solvers MisMatch Adapter 1.2 Pair
$40.00
MisMatch adaptors allow users to mount Shimano & SRAM brakes and shifters on one clamp. Available in multiple configurations. -Annodized Black -Attaches SRAM shifters to Shimano I-Spec II brake lever clamps MisMatch 1.2 adaptor fits Shimano brakes: BL-M9020, BL-M9000, BL-M8000, BL-M7000
Problem Solvers MisMatch Adapters
$29.95
Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.
Problem Solvers Seatpost Shim
$9.99
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
Problem Solvers Seatpost Shims
$9.99 - $11.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
Origin8 Chain Deflector
$8.00
• Anti chain-suck device • Allows the front derailleur to be adjusted for strong downshifts • If not using front derailleur the device can act as a chain guide
Odyssey Gyro G3
$19.25
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.
KMC 415H-OL Chain Connector
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
KMC Half Link Adapter
$1.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Jagwire Brake or Shift Cable Tips
$4.49 - $44.99
Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.
Jagwire Pro Compressionless Brake Housing
$64.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included
Greenfield RetroKit
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA
FSA Headset Compression Plug
$11.99 - $14.00
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug. - Alloy top cap - For carbon steer tubes
FSA MegaExo Left Crank Bolt for 19mm MegaExo Cranks
$3.99
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
Dimension Heavy Duty Seatpost Clamp
$7.99
Heavy duty bolt-on aluminum seatpost clamp.
Dimension Quill-To-Threadless Steerer Adapter
$24.99
Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch
Dimension Seatpost Clamp
$17.99
Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g
Dimension Steerer Extender
$39.99 - $44.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
Page 1 of 14 Next page