Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

No Image
$8.00
Replacement seals for servicing Cane Creek rear shocks.
Origin8 Chain Deflector
$8.00
• Anti chain-suck device • Allows the front derailleur to be adjusted for strong downshifts • If not using front derailleur the device can act as a chain guide
No Image
$8.00
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb
No Image
$8.00
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
No Image
$8.00 - $17.00
Shimano Deore XT M8000-GS Rear Derailleur Cage Plate
No Image
$8.00
This replacement Shimano bar-end shifter segment unit is the expansion core that goes inside the handlebar. These can become damaged in a crash or during installation or uninstallation.
Wheels Manufacturing Inc. Chainstay Protector
$8.35
Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.
No Image
$8.50
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
No Image
$8.95
- Syntace x-12 Derailleur hangers and screws are only compatible with frames that have Syntace x-12 Dropouts.
No Image
$8.99
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut. - 6061-T6 aluminum construction. - Standard 1-1/8-inch size.
No Image
$8.99
The Problem Solvers Cable Pulley is the correct replacement for their Cross Clamp pulley (Cross Clamp sold separately) and it will also work on most frames that have a mount for a pulley. You get the aluminum pulley and the brass bushing.
No Image
$9.00
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
No Image
$9.00
Air Spring Volume Reduction Kit - 1 x 5000 cubic mm spacer - 2 x inner air can o-rings
No Image
$9.00
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
No Image
$9.00
- Chainring bolts for Rival D1 2x cranks
SRAM M15/M26 Alloy GXP Crank Arm Bolt Kit
$9.00
M15/M26 Alloy GXP Crank Arm Bolt Kit
SRAM StealthamaJig Hydraulic Disc Brake Hose Fitting
$9.00
Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
No Image
$9.00
- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack
No Image
$9.00
Shimano XT RD-M786-GS Rear Derailleur Inner Cage Plate - "B" fit for XTR RD-M986-GS, Deore RD-M615-GS, RD-M610-GS - OEM inner cage plate for XT RD-M786-GS, SLX RD-M675-GS
No Image
$9.00
Shimano Deore XT RD-M786-SGS Rear Derailleur Inner Cage Plate - OEM inner cage plate for XT RD-M786-SGS, SLX RD-M675-SGS
No Image
$9.00
- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex
Wheels Manufacturing Inc. Chainstay Protector - Wide
$9.40
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.
FSA Microspacer Headset Spacers
$9.49
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
Campagnolo H11 Disc Caliper Mounting Screws
$9.95 - $10.95
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
No Image
$9.95
This magnetic stem cap is designed exclusively for the unique shape of the revolutionary Ritchey Chicane stem. - Material: alloy - Fits only Chicane stem - Weight: 6g
No Image
$9.95
Featuring a tasteful High Polish Silver finish with laser printed logo, this top cap perfectly matches the graphics on Classic stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits with 1-1/8" stems - Weight: 8g
No Image
$9.95
This top cap perfectly matches the graphics on all new Ritchey Comp stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits with 1-1/8" stems - Weight: 8g
No Image
$9.95
- Securely hide your Di2 Battery within your seatpost - Di2 battery sold separately
No Image
$9.95
Fork crown race for genuine Ritchey headsets. - For cartridge type headsets with a 45° taper - Alloy - ZS44/30
No Image
$9.95
You love your bike and you want to protect its beauty! The official Ritchey Frame Protection Stickers are here to defend your precious whip from cable rub, shoe scuffs and other damaging wear. Cover every possible contact point with 17 durable stickers of various sizes and shapes. Some of these clear stickers have the Ritchey logo, some of them don't. Stick them on the frame and ride without worry! - Heavy-duty and durable plastic stickers - 17 individual pieces per sheet - 5 shapes and sizes
No Image
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Replacement T20 bolts for Super Logic stems - Includes T20-M4x15L x 4pcs & T20-M4x18L x 3pcs - Bit Size: Torx 20 - Thread Pitch: M4 - Length: 18mm (x3), 15mm (x4)
No Image
$9.95
Carbon head set spacers for 1-1/8" steerer. - For 1-1/8" steerer - 10mm thick - 2pcs per bag - 33mm OD
Ritchey WCS Headset Top Cap
$9.95
Keep it consistent with original Ritchey replacement parts. Compression cap features etched Ritchey logo.
No Image
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Replacement M5 bolts for 4-Axis stems - Includes M5*P0.8*16L x 4pcs & M5*P0.8*18L x 2pcs - Bit Size: 4mm - Thread Pitch: M5 - Length: 4x 16mm, 2x 18mm
No Image
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: 4mm - Thread Pitch: M5 - Length: 4x 16mm, 2x 18mm
No Image
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: Torx 20 - Thread Pitch: M4 - Length: 15mm
No Image
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Bit Size: 4mm - Thread Pitch: M5 - Length: 4x 16mm, 2x 18mm
No Image
$9.95
Featuring a tasteful TR logo, this top cap perfectly matches the graphics on all new Ritchey WCS stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits 1-1/8" stems - Weight: 8g
Wolf Tooth Precision Knock Block Headset Spacer
$9.95
Wolf Tooth Headset Spacers for Trek Knock Block are machined in the USA out of aircraft grade aluminum. - Compatible with Trek Knock Block system - These spacers have unique raised features that key to Knock Block compatible stems (made by Bontrager) - 1 1/8" top (straight 1 1/8" or 1 1/8" to 1 1/2" taper) steerer tubes only
Wolf Tooth Ultralight Stem Cap With Integrated Spacer
$9.95
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.
No Image
$9.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 38mm lower headset bearings - Compatible with 26.4mm (1") straight steerer tubes - Durable steel construction
No Image
$9.99
Travel reduction clips for Cane Creek suspension forks.
No Image
$9.99
Your frame is BB30 or PF30. Your crank is 386EVO. No sweat. This adapter from FSA makes it happen. - For road use - Weight: 50g
No Image
$9.99
Housing liner provides an extra line of protection between cables and housing. - Slick-Lube housing liner reduces friction to improve braking feel - Compatible with Nokon brand cable housing systems
Lizard Skins Frame Shock Boot
$9.99
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
No Image
$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
No Image
$9.99 - $11.99
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.
Problem Solvers Seatpost Shim
$9.99
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
Problem Solvers Seatpost Shims
$9.99 - $11.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims. -100mm long -3mm lip -Alloy Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
Redshift Sports Replacement Elastomer Kit For Shockstop Stem
$9.99
Make your ShockStop Suspension Stem feel like new again with the Replacement Elastomer Kit. Mix and match different stiffnesses to perfectly tune your ShockStop Stem. What's in the Box: - One of each 50, 60, 70, 80, and 90 durometer elastomer (softest to hardest)
No Image
$10.00
- Chromoly steel - CNC fabrication - 1.29" x 24tpi left hand thread
All-City Top Cap
$10.00
Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap. - Includes star nut
DVO IGUS Bushing Rear Shock Mount Hardware Kit
$10.00
A five-piece IGUS bushing spacer kit for mounting rear shocks. - Compatible with x eyelet shocks using IGUS bushings mounted in the shock eyelet - Select the correct hardware kit for your mounting bolt diameter (e.g. 6mm, 8mm) and frame mount width (e.g. 22mm, 24mm)
No Image
$10.00
FSA MegaExo Cartridge Bearing - 37 x 25 x 6mm
KMC MissingLink 12-Speed
$10.00 - $12.00
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
No Image
$10.00
RockShox Reverb Hose Parts
No Image
$10.00
Alternator Hardware Set for 2011–12 Ti frames and all 2013+ aluminum frames.
No Image
$10.00
Ensure your bike's rear wheel is secure with Salsa Alternator Hardware Set for 2013+ Ti and all steel frames.
No Image
$10.00
- Open end allows use of bar ends, also while looking good - Compatible only with Salsa Backcountry Grips