Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cables

• For mountain bike cable-actuated brakes • 1.5mm x 3000mm • Stainless steel
$6.00
- Complete cable kits for internal three speed hubs
- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert
$45.00
Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black
Stainless steel cables are extruded to provide a smooth low-friction surface.
$15.00
- Time saving system for managing brake cables on Break-Away bikes - Light threaded alloy barrels with rubber noise dampener
$24.99
The Problem Solvers Downtube Shift Cable Adjusters replace your existing shift adjusters, or let you add integrated shifters to your current down tube shifter-equipped road bike. Made from durable plastic and stainless steel, these adjusters are built to last for countless miles on your road steed. - Sold as a pair - Comes with mounting hardware
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
$15.29
Alleviate brake cable alignment and tangles with Origin-8's Fork Mount Cable Hanger. Made from forged aluminum, it mounts easily to the hole in your bike's fork crown. - Forged aluminum construction - Mounts to most frame or fork mounting holes - Great for tricky cantilever brake setups - Lightweight design - Front for fork mount / Rear for frame mount
$3.99
- Sold in pairs - Allen wrench included
$10.99
Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.
$17.99
Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Small flange for smaller hydraulic loops
$14.99
Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.
$9.99
Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame
$5.99
Basics brake cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Compatible with Mountain and Road for Shimano/SRAM - Lead-free PVC housing - Enough cable and housing for one brake
Basics shift cable and housing set provide replacement level quality in an easy-to-use double ended package. - Non-extruded galvanized inner cable - Lead-free PVC housing - Double ended for SRAM/Shimano and Huret/Simplex - Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters - Color: Black - Diameter: 1.2mm - End Type: Shimano/SRAM - Housing Diameter: 5mm
$24.99 - $28.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
$6.99 - $54.99
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
$9.99
Extend housing runs using these double-ended junction end caps.
$10.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars
$12.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
$22.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Magura brakes and includes enough hardware for one bicycle.
$34.99 - $69.99
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.
$34.99 - $69.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
$48.99
Road Pro kits deliver enhanced performance and style. Teflon-coated cables used with our Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all the needed parts included, our Road Pro kits are easy to install. - Teflon-coated cables, Slick-Lube liners, and Kevlar reinforced, compressionless brake housing enhance performance - All parts needed for a complete brake and shift cable/housing install are included - A step above standard OEM cables and housing - Appearance options from classic to colorful What's Included: 1 1700mm LEX-SL Shift Housing 2 2300mm Teflon-Coated Shift Inner Cables 4 Lined Shift Alloy End Caps 1 Sealed Shift Alloy End Cap 1 Hooded Shift Alloy End Cap 2 Shift Cable Tips 1 1700mm KEB-SL Kevlar-Reinforced Brake Housing 1 850mm Teflon-Coated Front Brake Inner Cable 1 1650mm Teflon-Coated Rear Brake Inner Cable 2 Open Brake Alloy End Caps 2 Lined Brake Alloy End Caps 2 POP Alloy End Caps 2 Brake Cable Tips 4 Mini Tube Tops 9 Cable Donuts 3 Rotating Hooks 2 EZ-Bend Housing Segments
$74.99 - $79.99
Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.
$44.99
Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips
$39.99
Jagwire Sport DOT Hydraulic Hose Kits feature a durable, flexible reinforced layer surrounding a low-friction inner tubing to deliver light brake lever action and trustworthy braking power. Offered as single hose kits for individual brakes or in bulk boxes for workshop use, Sport FOT Hydraulic Hose is available for most popular road and mountain hydraulic disc brake systems that use DOT brake fluid. - High performance hydraulic hose provides effective braking power and control - Kits include hose and necessary fittings for one brake lever and caliper system - Contains 2000mm HFK hydraulic hose, needle insert, compression bushing, compression nut and seals for the listed compatible brake models - Compatible with SRAM Guide (A1 calipers), Level TL, DB5, and similar brakes - For use with DOT 3, DOT 4 or DOT 5.1 brake systems only
$15.99 - $16.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$29.99
Jagwire Sport Mineral Hydraulic Hose Kits feature a durable, flexible reinforced layer surrounding a low-friction inner tubing to deliver light brake lever action and trustworthy braking power. Offered as single hose kits for individual brakes or in bulk boxes for workshop use, Sport Mineral Hydraulic Hose is available for most popular road and mountain hydraulic disc brake systems that use mineral oil brake fluid. - High performance hydraulic hose provides effective braking power and control - Kits include hose and necessary fittings for one brake lever and caliper system - Contains 2000mm HPP hydraulic hose, needle insert, compression bushing, compression nut and seals for the listed compatible brake models - Compatible with Shimano Dura Ace (R9120, R9170), Ultegra (R8020, R8070), 105 (R7070), GRX (RX810, RX400), and similar brakes - For use with mineral oil brake systems only
$5.99 - $14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation
$5.99 - $14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
$5.49 - $11.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$26.99
Frame-mounted barrel adjusters allow cable tension to be easily fine tuned. - Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch - Bag of 10
$24.99
A great replacement for OE cables and a perfect way to bring style to a bike, our Universal Sport Brake Kits make it easy. They come with double-ended Slick Stainless cables compatible with SRAM and Shimano road and mountain systems. Our new and improved Slick-Lube liners reduce friction, providing improved shifting precision and long-lasting performance. - Double-ended brake cables are compatible with both mountain and road brakes - Sport Slick Stainless cables combined with Slick-Lube housing liners offer dependable braking performance and durability - All parts needed for a complete brake cable/housing install are included - OEM-level cables and housing with high-quality small parts
$23.99
Jagwire's Universal Sport Shift Kits are the perfect way to enhancing shifting performance and precision and add style to your bike, too. Compatible with Shimano, SRAM, and Campagnolo systems, the slick stainless cables provide smooth, precise shifts, excellent durability and corrosion resistance. And with the housing and all the needed parts included, these kits are easy to install and ready to deliver years of flawless gear changing.
$5.99
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$9.98 - $18.85
Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.
$5.99
- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually
$32.99
Hydraulic hose with banjo fitting for TRP brakes.
$32.99
Hydraulic hose with banjo fitting for TRP brakes.
$102.00
Shimano, SP41, 4mm Shifter housing, 50m
$130.00
- Brake housing for polymer coated brake cables - Refer to Documents and links to find the right product
$33.99
- Disc brake hose for all hydraulic Shimano disc brakes with straight connection type. Length 2000mm, outer diameter approx. 5mm. - Compatible brake levers: BL-T615, ST-M4050, BL-M506, BL-M505, BL-M445, BL-M396, BL-M395, BL-M355 - Compatible brake caliper: BR-T615, BR-M4050, BR-M447, BR-M446, BR-M395, BR-M355 - Also compatible ST-RS785 and ST-RS685 road hydraulic levers with BR-RS785 or BR-RS805 calipers - Straight connection at lever and caliper
$42.00
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease
$10.00
Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1
$27.00
Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps
$27.00
- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)
$38.00
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1
$108.00
Shimano, SLR brake housing, 40m, Black
$9.00
- Wet or muddy condition cable sealing solution - 4/6mm
$89.90 - $99.90
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
$43.90 - $49.90
- Brake casing has internal lining and external plastic coating - Length: 30m
$29.90
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
$8.00
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.
$22.00
- Complete ferrule and cable end kit - Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4) - Material: Aluminum
$45.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm
$19.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$19.00
SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
$9.00
SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.
Page 1 of 3 Next page